Monticello Flooring White Oak Choice 3 1/4 inch Prefinished Solid Hardwood Flooring

Product Description

White Oak is the most popular hardwood flooring in the world. White Oak has a rich, earth-tone color, a coarse grain, and a suitable hardness for most homes.

Monticello Flooring and Lumber is proud to present the Davenport Collection, a line of prefinished solid hardwood flooring that is completely manufactured in the United States. The line consists of all domestic wood species that are harvested from the Appalachian Hardwood Manufacturer's Verified Sustainable Hardwood Forests. The manufacturers that participate in this program, like Monticello who is a verified member, offer a commitment to maintaining our domestic forests in an environmentally friendly manner.

Monticello Flooring is a NOFMA mill. NOFMA (North American Flooring Manufacturers Association) is responsible for the formulation and administration of industry standards relating to hardwood flooring. Establishing grading rules is a major part of these standards.

Choice Grade

Grade Mix: 75% Select / 25% #1 Common

This product will offer a primarily SELECT product which will ensure that most of the product will be of top grade and overall appearance shall be good. This product will offer the most uniform color. This grade will include characteristics found in the unfinished grades of NOFMA Select and #1 Common.

The following characters are admitted: unlimited sapwood and the natural variations of color, occasional small burls, light brown streaks not more than 1/8" in width and 6" in length or the equivalent; an occasional very small tight 1/8" knot; and limited 1/32" fine pinworm holes may be included in any one piece; will not allow pieces with less than 3/4" full tongue.

Average lengths will be longer than those in the Standard Antique and Designer's Choice Grade.

It is the primary goal of the Davenport Collection line to limit to the extent possible the inclusion of any allowable characters that will in any way detract from the look or the quality of the product.

PLEASE NOTE: Occasionally, small flaws occur during transportation, cutting, etc., which do not necessarily preclude use of the board. These may be used for cuts required when installing the flooring, providing this does not affect the total footage calculated for the project, faulty boards that are affected should not be used. Should the problem repeat itself over more than 10% of the total ordered floor contact your retailer.