The Powernail Powerjack Model 100 is a solution for the professional flooring contractor to help get those last boards installed in a room without damaging them! We’ve all been there, using prybars or screwdrivers, twisting them, pulling on them, messing up the subfloor and the drywall… We, hack away no more! The Powerjack Model 100 slides easily over the tongue of the board, and spreads the impact out over a few inches, rather than concentrated like a scredriver would. When the jack is in place, all you need to do is crank it out and it will move out against the wall and pull the board into place for proper nailing.

If you are stuck in the middle of the room, and working with wide plank, reclaimed flooring, or just plain old warped flooring boards, check out the Powernail Model 200 Powerjack. It is similar to the 100, but sits in front of the flooring, and is screwed into the subfloor. Once you have the board cranked into place, and nailed/glued in, you can unscrew the jack and move on.